logo
Shanghai Tankii Alloy Material Co.,Ltd
Shanghai Tankii Alloy Material Co.,Ltd
المنتجات
المنزل /

المنتجات

Manganin CuMn12Ni Precision Resistance Foil

تفاصيل المنتج

مكان المنشأ: الصين

اسم العلامة التجارية: TANKII

إصدار الشهادات: ISO 9001

رقم الموديل: 6J12/6J13

شروط الدفع والشحن

الحد الأدنى لكمية: 10

الأسعار: قابل للتفاوض

تفاصيل التغليف: خشب + بكرات + صندوق كرتون

وقت التسليم: 10-25 يوم عمل

شروط الدفع: تي/تي

القدرة على العرض: 500 طن / سنة

احصل على افضل سعر
اتصل الآن
المواصفات
إبراز:
مادة:
سبائك النحاس والنيكل والمنغنيز
المقاومة:
0.43-0.48 ميكرومتر
كثافة:
8.4 جم/سم3
سماكة:
0.01-0.20 ملم
عرض:
2-300 مم
سطح:
ساطع
حالة:
صلب ناعم / صلب
التطبيقات:
مقاومات التحويل، مقاومات الاستشعار الحالية، مقاومات الدقة، العدادات الذكية،
مادة:
سبائك النحاس والنيكل والمنغنيز
المقاومة:
0.43-0.48 ميكرومتر
كثافة:
8.4 جم/سم3
سماكة:
0.01-0.20 ملم
عرض:
2-300 مم
سطح:
ساطع
حالة:
صلب ناعم / صلب
التطبيقات:
مقاومات التحويل، مقاومات الاستشعار الحالية، مقاومات الدقة، العدادات الذكية،
الوصف
Manganin CuMn12Ni Precision Resistance Foil

Manganin CuMn12Ni Precision Resistance Foil

Product Description
Manganin wire widely used for precision resistors with the highest requirements, the resistors should be carefully stabilised and the application temperature should not exceed +60 °C. Exceeding the maximum working temperature in air may result in a resistance drift generated by oxidizing. Thus, the long-term stability can be affected negatively.  As a result, the resistivity as well as the temperature coefficient of  the electric resistance may slightly change. It is also used as low cost replacement material for silver solder for hard metal mounting.
 
Chemical Content, %

Ni Mn Fe Si Cu Other ROHS Directive
Cd Pb Hg Cr
2~5 11~13 <0.5 micro Bal - ND ND ND ND

 
Mechanical Properties

Max Continuous Service Temp 0-100ºC
Resisivity at 20ºC 0.44±0.04ohm mm2/m
Density 8.4 g/cm3
Thermal Conductivity 40 KJ/m·h·ºC
Temp Coefficient of Resistance at 20 ºC 0~40α×10-6/ºC
Melting Point 1450ºC
Tensile Strength(Hard) 585 Mpa(min)
Tensile Strength,N/mm2   Annealed,Soft 390-535
Elongation 6~15%
EMF vs Cu, μV/ºC (0~100ºC) 2(max)
Micrographic Structure austenite
Magnetic Property non
Hardness 200-260HB
Micrographic Structure Ferrite
Magnetic Property Magnetic

 
Resistance Alloy- Manganin Sizes / Temper Capabilities
Condition: Bright, Annealed, Soft 
Wire diameter 0.02mm-1.0mm packing in spool, big than 1.0mm packing in coil
Rod, Bar diameter 1mm-30mm 
Strip: Thickness 0.01mm-7mm, Width 1mm-280mm 
Enameled condition is available

Manganin Alloy Foil Low TCR Resistance Material for ShuntsManganin Alloy Foil Low TCR Resistance Material for ShuntsManganin Alloy Foil Low TCR Resistance Material for ShuntsManganin Alloy Foil Low TCR Resistance Material for ShuntsManganin Alloy Foil Low TCR Resistance Material for Shunts

منتجات مماثلة
CuNi23 Alloy 180 Copper Nickel Resistance Foil فيديو
احصل على افضل سعر
Inconel 600 Corrosion Resistant Nickel Alloy Strip فيديو
احصل على افضل سعر
Inconel 600 High Temperature Nickel Alloy Wire فيديو
احصل على افضل سعر
أرسل استفسارك
من فضلك أرسل لنا طلبك وسوف نقوم بالرد عليك في أقرب وقت ممكن.
يرسل